Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| equipment:jet-band-saw [2013/09/07 20:20] – created wreality | equipment:jet-band-saw [2014/05/10 15:41] (current) – wreality | ||
|---|---|---|---|
| Line 15: | Line 15: | ||
| ===Description=== | ===Description=== | ||
| + | A bandsaw uses a blade consisting of a continuous band of metal with teeth along one edge to cut various workpieces. The band rides on two wheels rotating in the same plane. Bandsawing produces uniform cutting action as a result of an evenly distributed tooth load. Bandsaws are used for woodworking, | ||
| ===Safety Rules=== | ===Safety Rules=== | ||
| + | In addition to the [[zones: | ||
| + | * Follow the 3” rule from the blade; always keep fingers 3” from the blade. | ||
| + | * Check the blade tension and tracking before starting. | ||
| + | * Don’t cut stock that is not flat on the bottom without a jig. | ||
| + | * Keep a balanced stance at the band saw. | ||
| + | * Never clear small pieces while the blade is moving. | ||
| + | * Never use your thumbs to push toward the blade. | ||
| + | * Never back out of a curve cut while the machine is running. | ||
| + | ===Useful Links=== | ||
| + | * [[http:// | ||
| ===Contacts for training== | ===Contacts for training== | ||
| + | Contact [[user: | ||
| ===Safety Training=== | ===Safety Training=== | ||
| + | * Review of machine and shop safety rules. | ||
| + | * Proper procedures for preparing / setup operations. | ||
| + | * Proper operation and control of machine. | ||
| + | * Proper procedures for cleanup. | ||
| + | ===Maintenance Log== | ||