Differences

This shows you the differences between two versions of the page.

--- lockout_tagout:start [2015/06/26 03:30]
zimmer62
+++ lockout_tagout:start [2017/04/05 00:38] (current)
@@ Line 9: / Line 9: @@
   * [[https://en.wikipedia.org/wiki/Lockout-tagout|wikipedia entry about lockout tagout]]
-==== Resources ====
+===== Resources =====
   * {{:lockout_tagout:lockou_tagout_1_sheet.pdf|Printable PDF for lockout tags}}
   * {{:lockout_tagout:lockou_tagout_1_sheet.ai|Adobe Illustrator for lockout tags}}
+===== IEC C13 Tagout =====
+{{:lockout_tagout:c13-sideview.jpg?150|}}{{:lockout_tagout:c13-plugside.jpg?229|}}
+  * {{:lockout_tagout:c13_tagout_source_files_freecad_and_stl.zip|FreeCad and STL Source files}}
+===== Example Tagout installations =====
+{{:lockout_tagout:image1_2_.jpg?200|}}
+{{:lockout_tagout:image2_2_.jpg?200|}}
+{{:lockout_tagout:image3.jpg?200|}}
+===== To do =====
+  * A box in each area that can hold tags / locks etc, sharpies, log book, and brochures.
+    * Probably keep one log book for the space, but tags and instructions near each area.
+  * Design and implement an online wiki log book
+  * 32 Tags need holes cut in them with a hole punch
+  * very small zip ties are needed
+  * Sharpies for each box are needed
+==== In Progress ====
+  * Jerry is designing a brochure.
+==== Already done ====
+  * Printed 40 tags
+  * 40 Tags have been cut out and laminated -- 8 tags were destroyed by the laminater.
+    * 32 tags are on the chalkboard near the entrance.
+  * Joe designed an IEC C13 3D printable plug to tagout a device which accepts that kind of power cord
+    * Used the dimensions from [[http://www.mouser.com/catalog/specsheets/KC-301194.pdf|Here]]
+    * Here are some images of the latest prototype: [[lockout_tagout:c13|C13 Tagout Plug]]