Differences

This shows you the differences between two versions of the page.

--- infrastructure_working_group [2015/08/05 19:42]
zimmer62
+++ infrastructure_working_group [2015/09/15 03:18]
zimmer62
@@ Line 27: / Line 27: @@
 ----
+=== Current Setup: ===
+  * SSID: LansingMakersNetwork
+  * Password: Written on the wall in many places around the space
+  * The old SSID of LansingMakers2 still works, however it's using new hardware, this will be deprecated eventually.
+There is also a LansingMakersGuest (currently this SSIS is not configured properly, so don't try and use it yet)
+You'll notice there are three access points now, 1 on each floor.
+. The one in the shop is located in the middle of the room.
+. The on the main floor is located to the right of the stage area
+. The one on the 3rd floor is located on the back wall near the electronic storage.
+If you see any of these access points with the light showing anything other than a solid Green, it would be helpful if you can report that here as well.
+Please do not plug in the old Linksys/Cisco access point, it is using the same SSID and will cause problems.
+----
+=== Change Log: ===
+/14/2015 upgraded firmware on all three AP's from 3.2.5.2791 to 3.2.12.2920
+----
 === Questions that need to be addressed: ===
 (Educated guesses are okay here)
@@ Line 54: / Line 71: @@
   - How will we allow for VPN connections from outside the building into the member only network?
   - How will we allow for members to run servers using static or dynamic IPs?
+----
+=== Items to recommend: ===
+  * Ubiquiti Networks UniFi AP Enterprise WiFi System UAP-3 (Pack of 3)
+    * Pros:
+      * Under $200 for 3 pack, but only supports 2.4ghz
+      * These come with power injectors.
+    * Cons:
+      * only supports 2.4ghz
+    * Info:
+      * [[https://www.ubnt.com/unifi/unifi-ap/|Manufacturer Link]]
+      * [[http://www.amazon.com/Ubiquiti-Networks-UniFi-Enterprise-System/dp/B005EORRBW/ref=sr_1_1?ie=UTF8&qid=1438804839&sr=8-1&keywords=UAP-3|Amazon $192.76]]
+      * NOT 802.1af (48v) compatible -- from amazon review.  need more info if that matters or what it means?
+    * Additional Equipment needed:
+      * We will need a cheap switch, or switch with POE injeciton
+      * Cat6 wire to install
+      * Cat6 termination ends
+----
+  * Ubiquiti TS-8-PRO ToughSwitch 8 Port Advanced Power Ethernet Controllers
+    * Pros:
+      * 24V/48V Passive PoE
+      * 8 Ports
+    * Info:
+      * [[http://www.amazon.com/Ubiquiti-TS-8-PRO-ToughSwitch-Advanced-Controllers/dp/B00CXU1NHY/ref=pd_sim_147_5?ie=UTF8&
+refRID=1WEN598N7N6TPV4Y7C3W|Amazon $178.90]]
+OR
+  * Ubiquiti TS-5-POE TOUGHSwitch 5 Port Advanced Power Ethernet Controllers
+    * Pros:
+      * Price
+    * Cons:
+      * 24V Passive PoE Only
+      * Only 5 Ports
+    * Info:
+      * [[http://www.amazon.com/Ubiquiti-TS-5-POE-TOUGHSwitch-Advanced-Controllers/dp/B00CXTK90W/ref=pd_sim_147_1?ie=UTF8&refRID=1WEN598N7N6TPV4Y7C3W|Amazon $82.59]]
 ----
@@ Line 74: / Line 131: @@
     * Suggested by a network admin of a small community college
     * Cost is around $700 for a 3 pack of routers
+  * Shielded vs Unshielded Cat6
 TODO: add links and research
-  * Ubiquiti Networks UniFi AP Enterprise WiFi System UAP-3 (Pack of 3)
-    * Under $200 for 3 pack, but only supports 2.4ghz
   * POE switch for access points
+    * What is 802.1af
     * Ubiquiti TS-8-PRO ToughSwitch 8 Port Advanced Power Ethernet Controllers
     * Ubiquiti TS-5-POE TOUGHSwitch 5 Port Advanced Power Ethernet Controllers