Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
equipment:jet-band-saw [2013/09/08 00:20] wreality created |
equipment:jet-band-saw [2017/04/05 00:38] (current) |
||
---|---|---|---|
Line 15: | Line 15: | ||
===Description=== | ===Description=== | ||
+ | A bandsaw uses a blade consisting of a continuous band of metal with teeth along one edge to cut various workpieces. The band rides on two wheels rotating in the same plane. Bandsawing produces uniform cutting action as a result of an evenly distributed tooth load. Bandsaws are used for woodworking, metalworking, or for cutting a variety of other materials. They are particularly useful for cutting irregular or curved shapes, but can make straight cuts. The minimum radius of a curve that can be cut on a particular saw is determined by the width of the band and its kerf. | ||
===Safety Rules=== | ===Safety Rules=== | ||
+ | In addition to the [[zones:shop safety rules]] the following should be observed when using this tool. | ||
+ | * Follow the 3” rule from the blade; always keep fingers 3” from the blade. | ||
+ | * Check the blade tension and tracking before starting. | ||
+ | * Don’t cut stock that is not flat on the bottom without a jig. | ||
+ | * Keep a balanced stance at the band saw. | ||
+ | * Never clear small pieces while the blade is moving. | ||
+ | * Never use your thumbs to push toward the blade. | ||
+ | * Never back out of a curve cut while the machine is running. | ||
+ | ===Useful Links=== | ||
+ | * [[http://www.cs.rpi.edu/twiki/pub/RoboticsWeb/WebFacilities/BandsawSafety.pdf|KCWG Bandsaw Safety Rules]] | ||
===Contacts for training== | ===Contacts for training== | ||
+ | Contact [[user:wreality:start|Brian Adams]] or [[user:carlraymond:start|Carl Raymond]] for safety training. | ||
===Safety Training=== | ===Safety Training=== | ||
+ | * Review of machine and shop safety rules. | ||
+ | * Proper procedures for preparing / setup operations. | ||
+ | * Proper operation and control of machine. | ||
+ | * Proper procedures for cleanup. | ||
+ | ===Maintenance Log== |