Differences

This shows you the differences between two versions of the page.

Link to this comparison view

equipment:8in-drill-press [2014/05/10 20:06]
wreality
equipment:8in-drill-press [2017/04/05 00:38]
Line 1: Line 1:
----- datatemplateentry equipment ---- 
-template ​     : templates:​equipment 
-picture ​      : :​equipment:​8in_drill_press.jpg 
-zone          : Machine Shop 
-name          : 8 inch Central Machinery Drill Press 
-manufacturer ​ : Central Machinery 
-model         : 44506 
-manual ​       : :​equipment:​44506.pdf 
-memberlevel ​  : Full 
-owner         : Tim Schmidt 
-type          : Drill Press 
-status_ ​      : Operational 
  
----- 
- 
-===Description=== 
- 
-**This drill press has a badly frayed drive belt.  Carl is in the process of trying to locate a new belt.** 
- 
-A drill press is a fixed style of drill that may be mounted on a stand or bolted to the floor or workbench. A drill press consists of a base, column , table, spindle, and drill head. The head has a set of handles radiating from a central hub that, when turned, move the spindle and chuck vertically, parallel to the axis of the column. The table can be adjusted vertically. 
-===Safety Rules=== 
-In addition to the [[zones:​shop safety rules]] the following rules should be followed. 
-  * A two foot perimeter around the drill press should be kept clear of people, debris and sawdust that impair traction or footing to avoid slips and falls. ​ 
-  * Safety glasses with side shields or a face shield must be worn. Hearing protection should be worn.  
-  * Remove loose fitting clothing, jewelry, and tie back long hair.  
-  * Give the work your undivided attention. ​ 
-  * Do not wear gloves or anything that would allow a hand, fingers or clothing to be wrapped around the revolving bit.  
- 
-===Contacts for training== 
-  * Tim Schmidt 
-  * Brian Adams 
-  * Carl Raymond 
- 
- 
-===Safety Training=== 
-  * Review of machine and shop safety rules. 
-  * Proper procedures for preparing / setup operations. 
-  * Proper operation and control of machine. 
-  * Proper procedures for cleanup. 
- 
-===Maintenance Log===