---- datatemplateentry equipment ----
template      : templates:equipment
picture       : equipment:jetbandsaw.jpg
zone          : Woodshop
name          : JET 14" Bandsaw
manufacturer  : JET
model         : JWBS-14OS
manual        : equipment:jet-bandsaw-model-jwbs-14cs.pdf
memberlevel   : Full
owner         : Lansing Makers Network
type          : Bandsaw
status_       : Operational

----

===Description===
A bandsaw uses a blade consisting of a continuous band of metal with teeth along one edge to cut various workpieces. The band rides on two wheels rotating in the same plane. Bandsawing produces uniform cutting action as a result of an evenly distributed tooth load. Bandsaws are used for woodworking, metalworking, or for cutting a variety of other materials. They are particularly useful for cutting irregular or curved shapes, but can make straight cuts. The minimum radius of a curve that can be cut on a particular saw is determined by the width of the band and its kerf.
===Safety Rules===
In addition to the [[zones:shop safety rules]] the following should be observed when using this tool.
  * Follow the 3” rule from the blade; always keep fingers 3” from the blade. 
  * Check the blade tension and tracking before starting. 
  * Don’t cut stock that is not flat on the bottom without a jig. 
  * Keep a balanced stance at the band saw. 
  * Never clear small pieces while the blade is moving. 
  * Never use your thumbs to push toward the blade. 
  * Never back out of a curve cut while the machine is running.
===Useful Links===
  * [[http://www.cs.rpi.edu/twiki/pub/RoboticsWeb/WebFacilities/BandsawSafety.pdf|KCWG Bandsaw Safety Rules]]
===Contacts for training==
Contact [[user:wreality:start|Brian Adams]] or [[user:carlraymond:start|Carl Raymond]] for safety training.
===Safety Training===
  * Review of machine and shop safety rules.
  * Proper procedures for preparing / setup operations.
  * Proper operation and control of machine.
  * Proper procedures for cleanup.
===Maintenance Log==